The shower faucet handle is used everyday; you turn the faucet on and then turn it back off again. You do not care about the internal parts of the faucet; you only care about the water that comes out from it. But you do not know is that, minerals from water builds up on the internal parts of shower faucets which makes the shower faucet handle hard to twist or move.

When this happens, the shower faucet handle can either break or get stuck. Fortunately, you can repair the shower faucet on your own. Do not be afraid of touching or repairing things at your house because it is the best way to learn things. This can save a lot of money and time. All you need are some tools to handle this job.

Things you need to remember when repairing a shower faucet handle:

1. Make sure that you know the brand and the measurement of the shower faucet. This is important because different brands mean different parts. If in case you cannot locate the brand name, you can take a picture of the shower faucet and show it to the sales lady.

2. Then describe the problem with the shower faucet to the one assisting you in the hardware store. They can provide tips and advises on how what kind of tools you need.

3. So once you already have the things you need it is time to repair. Turn off the water before disassembling the shower faucet. To turn off completely the water supply, look for the valve that is usually located under the sink.

4. Then close the drain stopper in the sink. This is important because you are going to remove small screws and they might roll down the drain if you were not able to catch it.

5. Then remove the shower faucet handle. Take the new one and then screw it in place by following the instructions on the manual that comes with it.